Moraira Bioclimatic Pergola is built on the basis of a frame structure with a 90º cut. The beam incorporates an extrusion gutter and the water drainage is channeled through the pillars. One of these pillars is also used for housing the electronic technical components (switchboards and meteorological sensors).
The placement of slats and mechanisms is done from the inside, which facilitates assembly. The opening of slats on this model goes from 0º to 135º. In both self-supporting or wall-mounted installation, the maximum dimensions of assembly are 6000x4000mm. A perimeter LED strip (RGB or White) that does not require mechanization in structure and is easily installable afterwards can be optionally incorporated. The heating system and 4 × 2.5W stereo audio can also be optionally installed.